Base unit
To join the conversation, press
MZN
when the
handset is on an outside call.
Note for handset and base unit:
R
A maximum of 3 parties (including 1 outside
party) can join a conversation using 2
extensions.
(3-way conference)
R
To prevent other users from joining your
conversations with outside callers, turn call
sharing mode off (page 38).
Transferring calls, conference
calls
Outside calls can be transferred or a
conference call with an outside party can be
made:
– between handsets
– between a handset and the base unit
Handset
1
During an outside call, press
M
MENU
N
.
2
MbN
:
“
Intercom
”
a
M
SELECT
N
3
MbN
: Select the desired unit.
a
M
SELECT
N
R
If you select
“
Voice paging
”
, the
call will be switched from the
ear-receiver mode to the
speakerphone mode.
4
Wait for the paged party to answer.
R
If the paged party does not answer,
press
M
BACK
N
to return to the outside
call.
5
To complete the transfer:
Press
M
OFF
N
.
To establish a conference call:
M
MENU
N
a
MbN
:
“
Conference
”
a
M
SELECT
N
R
To leave the conference, press
M
OFF
N
.
The other 2 parties can continue the
conversation.
R
To put the outside call on hold:
M
MENU
N
a
MbN
:
“
Hold
”
a
M
SELECT
N
To resume the conference:
M
MENU
N
a
MbN
:
“
Conference
”
a
M
SELECT
N
R
To cancel the conference:
M
MENU
N
a
MbN
:
“
Stop conference
”
a
M
SELECT
N
You can continue the conversation
with the outside caller.
Base unit
1
During an outside call, press
M
INTERCOM
N
.
When 2 or more handsets are
registered:
– To page a specific handset, enter the
handset number.
– To page all handsets, press
0
or wait
for a few seconds.
2
Wait for the paged party to answer.
R
If paged party does not answer, press
M
INTERCOM
N
to return to the outside
call.
3
To complete the transfer:
Press
MZN
.
R
The outside call is being routed to the
handset.
To establish a conference call:
Press
M
CONF
N
.
R
To leave the conference, press
MZN
.
The other 2 parties can continue the
conversation.
R
To put the outside call on hold, press
M
HOLD
N
. To resume the conference,
press
M
CONF
N
.
Intercom
Intercom calls can be made:
– between handsets
– between a handset and the base unit
Note for handset and base unit:
R
When paging unit(s), the paged unit(s)
beeps for 1 minute.
R
If you receive an outside call while talking
on the intercom, the interrupt tone sounds.
–
Handset:
To finish intercom, press
M
OFF
N
. To answer the call, press
M
N
.
–
Base unit:
To finish intercom, press
MZN
. To answer the call, press
MZN
again.
Note for handset:
R
To change the ringer volume and ringer
tone for intercom, see page 36.
For assistance, please visit http://shop.panasonic.com/support
19
Making/Answering Calls
TGF74xUSA_OI_0416_ver211.pdf 19
2020/04/16 8:51:25
