Panasonic KX-TGF342C, Operating Instructions Manual, Page: 34 / 64

Sub-menu 1 Sub-menu 2 Settings Code
Auto intercom – On
< Off >
#273 19
Change language
(Display)
– <
English
>
Français
#110 13
Main menu: “
Cust. Support
”
Operation Code
Displaying customer support Web address. #680 –
*1 If you program these settings using one of the units, you do not need to program the same
item using another unit.
*2 This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
*3 This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select
“ Caller ID auto ” . To turn this feature off, select
“
Manual
” . (Call Display subscribers only)
To use this feature, set the date and time first (page 13).
*4 If you subscribe to a distinctive ring service, select a tone (tone 1 to 2). If you select a
melody, you cannot distinguish lines by their ringers.
*5 The preset melodies in this product ( “
Tone 3
” - “
Melody 10
” ) are used with permission of
© 2009 Copyrights Vision Inc.
*6 This setting is available when you have the key detector (KX-TGA20). Read the installation
manual for more information on the key detector.
*7 For models with supplied key detectors, the display shows “ 1:
Detector1
”.
*8 If you register 2 or more key detectors.
*9 If you subscribe to a Call Display service and want to view the caller’s information after lifting
up the handset to answer a call, turn off this feature.
*10 The flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
*11 Generally, the line mode setting should not be changed. This setting automatically maintains
receiver volume at the proper level depending on the current telephone line condition. Set
the line mode to
“
A
” if telephone line condition is not good.
34 For assistance, visit www.panasonic.ca/english/support
Programming