R
The following are used for both uppercase and lowercase:
Cyrillic character table (
)
z
1
2
3
4
5
6
7
8
9
Error messages
Display message
Cause/solution
Base no power
or
No link.
Reconnect
AC adaptor.
R
Confirm the base unit’s AC adaptor is connected to the unit
and the power outlet correctly.
R
The handset has lost communication with the base unit. Move
closer to the base unit and try again.
R
Unplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.
R
The handset’s registration may have been cancelled.
Re-register the handset (page 41).
Check
Phone Line
R
The supplied telephone line cord has not been connected yet
or not connected properly. Check the connections (page 11).
Checking
R
The automated call block function is in operation. Try again
later.
Error
R
Recording was too short. Try again.
Memory Full
R
The phonebook memory is full. Erase unwanted entries
(page 29).
R
The call block list memory is full. Erase unwanted entries
(page 24).
R
The maximum number of base units (4) is already registered
to the handset. Cancel unused base unit registrations from
the handset (page 41).
Use
rechargeable
battery.
R
A wrong type of battery such as alkaline or manganese was
inserted. Use only the rechargeable Ni-MH batteries noted on
page 4, 8.
You must first
subscribe
to Caller ID.
R
You must subscribe to a Caller ID service. Once you receive
caller information after subscribing to a Caller ID service, this
message will not be displayed.
Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333
53
Useful Information
