Panasonic KX-TGD890C, Operating Instructions Manual, Page: 15 / 72

Other settings
Dialing mode
If you cannot make calls, change this setting
according to your telephone line service. The
default setting is
“ Tone ” .
“
Tone
” : For tone dial service.
“
Pulse
” : For rotary/pulse dial service.
1
M MENU N#120
2
MbN : Select the desired setting. a
M SAVE N a M OFF N
Low battery alert
This feature allows the unit to beep when the
handset battery needs charging.
When this feature is turned on, the unit notifies
you as follows.
n When you end a call:
– The unit beeps when the battery needs
charging.
n When the handset is in standby mode:
– If the battery needs charging, the unit
beeps at the selected interval up to 3
times.
Note for handset:
R At the end of each call, the unit displays a
large icon for a few moments to indicate the
battery level.
Setting low battery alert
To turn this feature on, select the desired alert
interval, or select
“ Off ” to turn this feature off.
The default setting is “ Every hour ” .
1
M MENU N#176
2
MbN : Select the desired setting. a
M SAVE N a M OFF N
For assistance, visit www.panasonic.ca/english/support 15
Getting Started
TGD890C(en)_0627_ver008.pdf 15 2023/06/27 12:17:20