Caller ID service
Important:
R
This unit is Caller ID
compatible. To use Caller ID
features, you must subscribe to
a Caller ID service. Contact
your phone service provider for
details.
Caller ID features
When an outside call is being
received, the caller information is
displayed.
Caller information for the last 50
callers is logged in the caller list
from the most recent call to the
oldest.
R
If the unit cannot receive caller
information, the following is
displayed:
–
“
Out of area
”
: The caller
dials from an area which
does not provide a Caller ID
service.
–
“
Private
”
: The caller
requests not to send caller
information.
–
“
Long dist.
”
: The caller
makes a long distance call.
R
If the unit is connected to a PBX
system, caller information may
not be properly received.
Contact your PBX supplier.
Talking Caller ID
This feature lets you know who is
calling without looking at the
display.
To use this feature, you must:
– subscribe to a Caller ID service
of your phone service provider.
– turn this feature on.
When caller information is
received, the unit announce the
caller’s name or phone number
received from your phone service
provider.
R
Name pronunciation may vary.
This feature may not pronounce
all names correctly.
R
Caller ID service has a limit of
how many characters can be
displayed. If the caller’s name is
too long, the unit may not be
able to display or announce the
entire name.
Setting Talking Caller ID
The default setting is
“
On
”
.
1
M
MENU
N
2
MbN
:
“
Talking CID
”
a
M
OK
N
3
MbN
: Select the desired
setting.
a
M
OK
N
a
M
EXIT
N
For assistance, please visit http://shop.panasonic.com/support
11
Basic Operation
PNQX8877ZA_0115_ver101.pdf 11
2019/01/15 17:09:23
