Wall mounting
The base unit can be mounted on a wall by
changing the wall mounting adaptor’s position.
Note:
R
Make sure that the wall and the fixing
method are strong enough to support the
weight of the unit.
R
Model shown is KX-TG7841 series.
Base unit
1
To remove the wall mounting adaptor,
push down the release levers (
A
).
Remove the adaptor (
B
).
A
A
A
A
B
B
B
B
2
A
Turn the adaptor so that the words
“UP WALL” are facing up.
B
Tuck the telephone line cord inside the
wall mounting adaptor.
C
Connect the AC adaptor cord and
telephone line cord.
3
1
2
Hook
3
Insert the lower tabs of the adaptor into
the unit’s bottom slots (
A
), then insert by
pushing down the levers of the adaptor
into the upper slots (
B
).
R
The words “UP WALL” should be
facing up.
A
A
A
A
B
B
B
B
4
Mount the unit on a wall then slide down
to secure in place.
83 mm
(3
1
/
4
inches)
or
102 mm
(4 inches)
2
1
Wall phone plate
102 mm
83 mm
(4 inches)
1
2
(3
1
/
4
inches)
Charger
Drive the screws (not supplied) into the wall.
Screws
27.2 mm
(
ޓ
inches)
1
/
16
For assistance, please visit http://www.panasonic.com/help
67
Useful Information
TG78xx(en)_1210_ver101.pdf 67
2012/12/10 21:19:31
