8
KX-TG1061CM/KX-TGA106CM
5.2.2.
Battery Charge
Charge for about 7 hours.
• When the batteries are fully charged, the charge indicator
goes off.
Note:
• It is normal for the handset to feel warm during charging.
• Clean the charge contacts of the handset and charger with a
soft and dry cloth.
Clean if the unit is exposed to grease, dust, or high humidity.
5.2.3.
Battery Level
Note:
• The batteries need to be charged if the cordless handset
beeps while you are engaged in a call or operating the
answering system remotely.
5.2.4.
Panasonic Ni-MH Battery Perfor-
mance (supplied batteries)
Note:
• Actual battery performance depends on a combination of
how often the handset is in use and how often it is not in use
(standby).
• Even after the handset is fully charged, the handset can be
left on the charger without any ill effect on the batteries.
• The battery level may not be displayed correctly after you
replace the batteries. In this case, place the handset on the
charger and let it charge for at least 7 hours.
Summary of Contents for KX-TGA106CM
