Useful Information
45
For assistance, please visit http://www.panasonic.com/help
5
Connect the telephone line cord.
Mount the unit by inserting the
mounting pins into the round
openings on the adaptor (for pin
2
,
use the round cut out at the bottom
of the adaptor if you are using the 4
inch phone plate), then slide the unit
down to secure it. Connect the AC
adaptor to power outlet (page 12).
L
There are 2 common types of wall
phone plates. The distance
between
1
and
2
may vary
depending on the size of the wall
phone plate installed.
To remove the wall mounting adaptor
While pushing down the release levers
(
A
), remove the adaptor (
B
).
Charger
1
Drive the screws (not included) into
the wall.
2
Mount the charger (
A
), then slide it
down (
B
) and to the right (
C
) until it
is secure.
83 mm
(3
1
/
4
inches)
or
102 mm
(4 inches)
83 mm
(3
1
/
4
inches)
102 mm
(4 inches)
(120 V AC,
60 Hz)
1
2
1
2
Available for:
KX-TG9332/KX-TG9333/
KX-TG9334/KX-TG9342/
KX-TG9343/KX-TG9344
B
A
A
25.4 mm
(1 inch)
Screws
(120 V AC, 60 Hz)
A
B
C
TG93XX_OI.book Page 45 Thursday, December 27, 2007 3:38 PM
