telephone company instructions using
M
R/ECO
N
. (Recall/flash function)
R
If the phone number is stored in the
phonebook with its name, the caller’s name
will also be displayed.
R
Please contact your service provider/
telephone company for details and
availability in your area.
For Caller ID Type II users
When you receive a 2nd call during a
conversation, you will hear a signal tone
following the call waiting tone and the
conversation will be interrupted or muted
for a short period of time
. This is not a fault
of the product as these events are normal.
R
The tones are generated by your service
provider/telephone company.
For Call Waiting or Call Waiting
Caller ID service users (for New
Zealand)
To use call waiting or Call Waiting Caller ID,
you must first subscribe with your service
provider/telephone company.
This feature allows you to receive calls while
you are already talking on the phone. If you
receive a call while on the phone, you will hear
a call waiting tone.
If you subscribe to both Caller ID and Call
Waiting with Caller ID services
, the 2nd
caller’s information is displayed after you hear
the call waiting tone on the handset.
1
Press
M
R/ECO
N
to answer the 2nd call.
2
To switch between calls, press
M
R/ECO
N
.
Note:
R
Please contact your service provider/
telephone company for details and
availability of this service in your area.
Category ringer tone
This feature can help you identify who is
calling by using different ringer tones for
different categories of callers. When adding an
entry to the shared phonebook, you can
assign it to the desired category (page 20).
When a call is received from a caller assigned
to a category, the ringer you selected for that
category rings after caller information is
displayed.
If you select
“
Default Ringer
”
, the unit
uses the ringer tone you selected on page 27
when calls from this category are received.
The default setting is
“
Default Ringer
”
.
1
(left soft key)
a
2
MbN
:
“
Category
”
a
3
MbN
: Select the desired category.
a
4
MbN
: Select the current setting of the
category ringer tone.
a
5
MbN
: Select the desired ringer tone.
a
6
M
N
Caller list
Important:
R
Only 1 person can access the caller list at a
time.
R
Make sure the unit’s date and time setting
is correct (page 14).
Viewing the caller list and calling
back
1
MFN
( )
2
Press
MCN
to search from the most recent
call, or press
MDN
to search from the
oldest call.
R
You can see the detailed information
about the caller by pressing
when in multiple display mode.
3
To call back, press
M
N
.
To exit, press
M
N
.
Note:
R
If the entry has already been viewed or
answered, “ ” is displayed, even if it was
viewed or answered using another handset.
R
If the call matches an entry in the call
barred list, the number is logged with
(page 31).
40
Caller ID Service
TG8562_8563AZ(en)_0327_ver021.pd40 40
2012/03/27 14:08:07
