Useful Information
47
Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333
SMS (Short Message Service)
I cannot remember the PIN.
L
Change the PIN using the following method.
1
"
(middle soft key)
2
Select
L
by pressing
{^}
,
{V}
,
{
<
}
, or
{
>
}
.
i
#
(middle soft key)
3
“
Other Options
”
i
#
4
“
Base Unit PIN
”
i
#
5
Press
{*}{
7
}{
0
}{
0
}{
0
}
.
6
Enter the new 4-digit base unit PIN.
i
#
i
{ih}
Problem
Cause & solution
I cannot send or receive SMS
messages.
L
You have not subscribed to the appropriate service.
Consult your service provider/telephone company.
L
The SMS message centre number(s) are not stored
or are incorrect. Store the correct numbers (page
27).
L
Message transmission was interrupted. Wait until
the message has been sent before using other
telephone functions.
L
Your unit is connected to a telephone line with DSL
service. We recommend connecting a filter (contact
your DSL service provider) to the telephone line
between the base unit and the telephone line jack.
The SMS message centre number
is logged in the caller list and the
message is not received.
L
Someone tried to send you a message while SMS
is turned off.
“
FD
”
is displayed.
L
The unit could not connect to the SMS message
centre. Confirm that the correct SMS message
centre numbers are stored (page 27). Confirm that
SMS is turned on (page 27).
“
FE
”
is displayed.
L
An error occurred while sending the message. Try
again.
“
E0
”
is displayed.
L
Your phone number is permanently withheld or you
have not subscribed to the appropriate service.
Consult your service provider/telephone company.
“
Q
” is not displayed after I read a
message.
L
When an error code (
“
FD
”
,
“
FE
”
, or
“
E0
”
) is
displayed, “
Q
” will not be displayed even if you
have read the message.
Problem
Cause & solution
TG8100-8120E(e).book Page 47 Friday, March 3, 2006 10:34 AM
