Panasonic KX-TG8052C Page 40 Operating Instructions Manual Download

Page: 40 / 48

Useful Information

Error messages

*1 KX-TG8061 series: page 3

Display message

Cause/solution

Base no power

No link to base. Reconnect
main base AC adaptor.

The handset has lost communication with the base
unit. Move closer to the base unit and try again.

Unplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.

The handset’s registration may have been
cancelled. Re-register the handset (page 29).

Busy

The called unit is in use.

Other units are in use and the system is busy. Try
again later.

The handset you are using is too far from the base
unit. Move closer and try again.

Check tel line

The supplied telephone line cord has not been
connected yet or not connected properly. Check the
connections (page 10).

Error!!

Recording was too short. Try again.

Invalid

There is no handset registered to the base unit
matching the handset number you entered.

The handset is not registered to the base unit.
Register the handset (page 29).

Requires subscription to
Caller ID.

You must subscribe to a Call Display service. Once
you receive caller information after subscribing to a
Call Display service, this message will not be
displayed.

Use rechargeable battery.

A wrong type of battery such as Alkaline or
Manganese was inserted. Use only the rechargeable
Ni-MH batteries noted on page 4, 7.

TG80xxC(e).book Page 40 Friday, June 10, 2011 2:06 PM

Summary of Contents for KX-TG8052C

















































Search results

Summary of Contents for KX-TG8052C

Reviews:

Related manuals for KX-TG8052C

Brands by name

Popular brands

Panasonic KX-TG8052C, Operating Instructions Manual

Search results

Summary of Contents for KX-TG8052C

Reviews:

Related manuals for KX-TG8052C

Brands by name

Popular brands