Answering system for
landline
The answering system can answer and record
calls for you when you are unavailable to
answer the phone.
You can also set the unit to play a greeting
message but not to record caller messages by
selecting
“
Greeting only
”
as the recording
time setting (page 62).
Important:
R
Only 1 person can access the answering
system (listen to messages, record a
greeting message, etc.) at a time.
R
When callers leave messages, the unit
records the day and time of each message.
Make sure the date and time have been set
correctly (page 17).
R
When the cellular line only mode is set
(page 20), the answering system cannot be
used and any messages are not received.
R
The unit’s answering system will not
answer incoming calls on your FaxAbility
number. (for New Zealand)
Memory capacity (including your
greeting message)
The total recording capacity is about 18
minutes. A maximum of 64 messages can be
recorded.
Note:
R
When message memory becomes full:
–
“
Messages full
”
is shown on the
handset and base unit display.
– The ANSWER ON/OFF indicator on the
base unit flashes rapidly if the answering
system is turned on.
– If you use the pre-recorded greeting
message, the unit automatically switches
to another pre-recorded greeting
message asking callers to call again
later.
– If you recorded your own greeting
message, the same message is still
announced to callers even though their
messages are not recorded.
Turning the answering
system on/off
Base unit
Press
M
ANSWER ON/OFF
N
to turn on/off the
answering system.
Handset
1
To turn on:
M
MENU
N#327
To turn off:
M
MENU
N#328
2
M
OFF
N
Note for base unit and handset:
R
When the answering system is turned on,
the ANSWER ON/OFF indicator on the
base unit lights up.
Call screening
Handset / Base unit
While a caller is leaving a message, you can
listen to the call through the unit’s speaker.
To adjust the speaker volume, press
MDN
or
MCN
repeatedly.
You can answer the call by pressing
M
N
on
the handset or
MZN
on the base unit.
Call screening can be set for each unit. The
default setting is
“
On
”
.
1
M
MENU
N#310
2
MbN
: Select the desired setting.
a
M
SAVE
N
3
Proceed with the operation for your unit.
Handset:
M
OFF
N
Base unit:
M
EXIT
N
Greeting message
When the unit answers a call, a greeting
message is played to callers.
You can use either:
– your own greeting message
– a pre-recorded greeting message
56
Answering System for Landline
TG78xxAZ(en)_0217_ver521.pdf 56
17/2/2016 11:47:39 AM
