Frequently asked questions
Telephone
Question
Cause/solution
What should I do when noise is
heard, sound cuts in and out?
L
You are using the handset or base unit in an area with
high electrical interference. Re-position the base unit and
use the handset away from sources of interference.
L
Move closer to the base unit.
L
If you use a DSL/ADSL service, we recommend
connecting a filter (contact your DSL/ADSL service
provider) to the telephone line between the base unit and
the telephone line socket. Contact your DSL/ADSL
provider for details.
Why is there no dial tone?
(cellular line)
L
Make sure that the CELL 1 or CELL 2 indicator lights up
and the cellular phone is connected to the base unit.
L
The cellular phone has not been paired to the base unit.
Pair the cellular phone.
Call waiting (using the recall button)
Question
Cause/solution
How do I answer the 2nd call
when I am talking with someone?
How can I use the call waiting
service?
L
Press
{
CALL WAIT
}
, and then
2
while on the 1st call,
this will switch to the 2nd call, press
{
CALL WAIT
}
and
then
2
again to alternate between calls or return to 1st
call, or press
{
CALL WAIT
}
and then
1
to terminate the
current call.
L
Call waiting is a service provided by your service
provider/telephone company. For additional information
on the use of this service, contact your service provider/
telephone company.
Model No.
KX-TG7882AZ/KX-TG7883AZ
KX-TG7892AZ/KX-TG7893AZ
L
Connect the AC adaptor and telephone line cord and charge the batteries for about 7 hours before
initial use.
L
Please read this FAQ’s Guide before using the unit and save for future reference.
FAQ’s Guide (for Australia)
TG788xAZ(en)_FAQ.fm Page 1 Wednesday, January 20, 2016 6:44 PM