Panasonic KX-TG7862NZ, Operating Instructions Manual

Page: 21 / 52

Programmable settings
You can customise the unit by programming the following features using the handset.
To access the features, there are 2 methods.
n Scrolling through the display menus
1
M N (right soft key)
2
Press MCN , MDN , MEN , or MFN to select the desired main menu. a M OK N
3
Press MCN or MDN to select the desired item from the next sub-menus. a M OK N
4
Press MCN or MDN to select the desired setting. a M OK N
R This step may vary depending on the feature being programmed.
R To exit the operation, press MeN .
n Using the direct command code
1
M N (right soft key) a Enter the desired code.
Example: Press M N (right soft key) #101 .
2
Select the desired setting. a M OK N
R This step may vary depending on the feature being programmed.
R To exit the operation, press MeN .
Note:
R In the following table, < > indicates the default settings.
R In the following table, indicates the reference page number.
R Display menu order and sub-menu may vary depending on your model.
Display the menu tree and direct command code table
Main menu: “
Answer System
”
Sub-menu 1 Sub-menu 2 Settings Code
Message List – – #329 34
Play New Msg. – – #323 34
Play All Msg. – – #324 34
Erase All Msg.
*1
– – #325 35
Greeting
Start REC
*1
(Record greeting)
– #302 33
Play Greeting – #303 34
Default
*1
(Reset to pre-recorded
greeting)
– #304 34
21
Programming
TG7861_62NZ(en)_1220_ver002.pdf 21 TG7861_62NZ(en)_1220_ver002.pdf 21 2012/12/20 18:24:13 2012/12/20 18:24:13