Panasonic KX-TG6642C, Operating Instructions Manual

Page: 17 / 60

Adjusting the base unit ringer volume
Press MDN or MCN repeatedly to select the
desired volume.
R To turn the ringer off, press and hold
MCN until the unit beeps.
Note:
R Even when the ringer volume is set to
off, the base unit still rings for
intercom calls (page 46).
Useful features during
a call
Hold
This feature allows you to put an outside
call on hold.
Handset
1
Press M MENU N during an outside
call.
2
MbN : “
Hold
” a M SELECT N
3
To release hold, press M N .
R Another handset user can take
the call by pressing
M N .
R The base unit user can take the
call by pressing
M SP-PHONE N .
Base unit
1
Press M HOLD N during an outside
call.
2
To release hold, press
M SP-PHONE N .
R A handset user can take the call
by pressing
M N .
Note for handset and base unit:
R If a call is kept on hold for more than 9
minutes, an alarm tone starts to
sound and the ringer indicator on the
handset flashes rapidly. After 1
additional minute on hold, the call is
disconnected.
R If another phone is connected to the
same line, you can also take the call
by lifting its handset.
R While an outside call is on hold, the
SP-PHONE indicator on the base unit
flashes.
Mute
While mute is turned on, you can hear
the other party, but the other party
cannot hear you.
Handset
1
Press M MUTE N during conversation.
R M MUTE N flashes.
2
To return to the conversation, press
M MUTE N again.
Note:
R M MUTE N is a soft key visible on the
handset display during a call.
Base unit
1
Press M MUTE N during conversation.
R The SP-PHONE indicator flashes.
2
To return to the conversation, press
M MUTE N again.
Flash
Handset / Base unit
M FLASH N allows you to use the special
features of your host PBX such as
transferring an extension call, or
accessing optional telephone services.
Note:
R To change the flash time, see
page 28.
For Call Waiting or Visual Call
Waiting service users
To use Call Waiting or Visual Call
Waiting, you must first subscribe with
17
Making/Answering Calls