Panasonic KX-TG6642C, Operating Instructions Manual

Page: 15 / 60

Making calls
Using the handset
1
Lift the handset and dial the phone
number.
R To correct a digit, press M CLEAR N .
2
Press M N or M CALL N .
3
When you finish talking, press
M OFF N or place the handset on the
base unit or charger.
Using the speakerphone
1
Dial the phone number and press
M N .
R Speak alternately with the other
party.
2
When you finish talking, press
M OFF N .
Note:
R For best performance, use the
speakerphone in a quiet environment.
R To switch back to the receiver, press
M N / M N .
Adjusting the receiver or speaker
volume
Press MDN or MCN repeatedly while talking.
Making a call using the redial list
The last 5 phone numbers dialed are
stored in the redial list (each 48 digits
max.).
1
M REDIAL N or MEN REDIAL
R If there is a new message in the
Voice Mail or answering system,
M REDIAL N is not displayed.
2
MbN : Select the desired phone
number.
3
M N
Erasing a number in the redial list
1
M REDIAL N or MEN REDIAL
2
MbN : Select the desired phone
number. a M ERASE N
3
MbN : “
Yes
” a M SELECT N
4
M OFF N
Using the base unit
1
Dial the phone number.
2
M SP-PHONE N
3
When the other party answers,
speak into the microphone.
R Speak alternately with the other
party.
4
When you finish talking, press
M SP-PHONE N .
Note:
R For best performance, use the
speakerphone in a quiet environment.
R While on a call, you can switch from
the base unit to the handset:
– Press
M N on the handset, then
press M SP-PHONE N on the base
unit with the privacy mode off
(page 28).
– If the handset is on the base unit,
simply lift it.
Adjusting the speaker volume
Press MDN or MCN repeatedly while talking.
Making a call using the redial list
The last 10 phone numbers dialed are
stored in the redial list (each 48 digits
max.).
1
M N REDIAL
2
MbN : Select the desired phone
number.
3
M SP-PHONE N
15
Making/Answering Calls