Programming
25
For assistance, please visit http://www.panasonic.com/help
Registering a unit
Operating additional units
Additional handsets
Up to 6 handsets can be registered to the base
unit.
Important:
L
See page 5 for information on the available
model.
Registering a handset to the base
unit
The supplied handset and base unit are pre-
registered. If for some reason the handset is
not registered to the base unit, re-register the
handset.
1
Handset:
{
MENU
}
(
13
)
2
Base unit:
Press and hold
{
LOCATOR
}
for about 5
seconds until the registration tone
sounds.
L
If all registered handsets start ringing,
press the same button to stop. Then
repeat this step.
L
The next step must be completed
within 90 seconds.
3
Handset:
Press
{
OK
}
, then wait until a long beep
sounds.
Note:
L
While registering,
“
Base in
registering
”
is displayed on all
registered handsets.
L
When you purchase an additional handset,
refer to the additional handset’s installation
manual for registration.
Deregistering a handset
A handset can cancel its own registration (or
the registration of another handset) that is
stored to the base unit. This allows the
handset to end its wireless connection with the
system.
1
{
MENU
}
(
131
L
All handsets registered to the base
unit are displayed.
2
{
r
}
: Select the handset you want to
cancel.
s
{
SELECT
}
3
{
r
}
:
“
Yes
”
s
{
SELECT
}
4
{
OFF
}
TG413x(e).book Page 25 Friday, September 24, 2010 8:45 AM
