Bluetooth PIN
Problem
Cause/solution
I cannot remember the PIN.
R
Change the PIN using the following method.
Handset/Base unit:
1
M
MENU
N#619
2
*7000
3
Enter the new 4-digit PIN.
a
M
OK
N
4
Enter the new 4-digit PIN again.
a
M
SAVE
N
a
M
OFF
N
/
M
EXIT
N
Voicemail
Problem
Cause/solution
“
Voicemail msg. via phone
co.
”
is shown on the display.
How do I remove this message
from the display?
R
This notification is displayed when your phone service
provider’s voicemail service (not the unit’s answering system)
has recorded a message for you. Typically you can remove this
notification from the display by listening to the message. To
listen to the message, dial the voicemail number provided by
your phone service provider (for most cases, this will be your
own phone number), and follow the voice instructions.
Depending on your phone service provider, you may need to
remove all messages from your voice mailbox to remove the
notification. You can also remove this notification by pressing
and holding
#
until the unit beeps.
Liquid damage
Problem
Cause/solution
Liquid or other form of moisture
has entered the handset/base
unit.
R
Disconnect the AC adaptor and telephone line cord from the
base unit. Remove the batteries from the handset and leave to
dry for at least 3 days. After the handset/base unit are
completely dry, reconnect the AC adaptor and telephone line
cord. Insert the batteries and charge fully before use. If the unit
does not work properly, contact an authorized service centre.
Caution:
R
To avoid permanent damage, do not use a microwave oven to speed up the drying process.
74
For assistance, visit www.panasonic.ca/english/support
Useful Information
TG153CSK(en)_0422_ver021.pdf 74
2016/04/22 14:54:46
