16
Caller ID Service
*1 Only the emergency number setting is not reset.
*2 If you forget your PIN, see page 21.
*3 The recall/flash time depends on your telephone exchange or host PBX.
Contact your PBX supplier if necessary.
*4 If you change the PIN, please write down your new PIN as the unit will
not reveal it to you again.
*5 Call restriction feature restricts the handset from dialling certain phone
numbers. You can assign up to 10 phone numbers (memory locations
0–9) to be restricted.
*6 Emergency number feature determines which phone numbers may be
dialled while the call bar feature is turned on. A total of 4 emergency
numbers (memory locations 1–4) can be stored.
Caller ID Service
Using Caller ID service
Important:
L
This unit is Caller ID compatible. To use Caller ID features, you must
subscribe to a Caller ID service. Contact your service provider/telephone
company for details.
Caller ID features
Display indications
L
When new calls have been received, the display shows the number of
new calls.
Example:
4 new calls have been received.
L
Phone numbers of the last 50 different callers are logged in the caller list.
Example:
*1 Shown when this call has already been viewed or answered.
Press
{C}
to call back.
L
If the unit cannot receive caller information, the following is displayed:
−
“
OUT OF AREA
”: The caller dials from an area which does not provide a
Caller ID service.
−
“
PRIVATE
”: The caller requests not to send caller information.
{*}
Date and time: page 9
Code No.
Feature (default setting)
*1
TG1311_1312_1313EG(e).book Page 16 Tuesday, October 21, 2008 5:04 PM
