Panasonic KX-TES824 Features Manual Download

Page: 106 / 298

1.15 Optional Device Features

106

Feature Guide

1.15.4 Background Music (BGM)

Description

A proprietary telephone (PT) user can listen to background music (BGM) through the built-in speaker while
on-hook and idle.

Conditions

•

Hardware requirement:

A user-supplied external audio device, such as a CD player or radio for

External audio source.

•

The music heard through the PT is interrupted when going off-hook, receiving a call, or receiving a
paging announcement.

•

The audio can be selected through system programming (

Music on Hold [111]).

•

This feature can be turned on and off by dialling "1" while the extension is on-hook and idle, if BGM is
enabled through system programming (

BGM Control for APT [626]).

Installation Manual References

2.8.1 Connecting Peripherals

User Manual References

1.7.5 Turning on the Background Music (BGM)

Summary of Contents for KX-TES824











































































































































































































































































































Search results

Summary of Contents for KX-TES824

Reviews:

Related manuals for KX-TES824

Brands by name

Popular brands

Panasonic KX-TES824, Features Manual

Search results

Summary of Contents for KX-TES824

Reviews:

Related manuals for KX-TES824

Brands by name

Popular brands