Panasonic KX-TDE600 Installation Manual Download Page 6

Page: 6 / 258

Category

Model No.

Description

Trunk Cards

KX-TDA0180

8-Port Analogue Trunk Card (LCOT8)

KX-TDA0181

16-Port Analogue Trunk Card (LCOT16)

KX-TDA0183

4-Port Analogue Trunk Card (LCOT4)

KX-TDA0480

4-Channel VoIP Gateway Card (IP-GW4)

Extension Cards

KX-TDA0174

16-Port Single Line Telephone Extension Card (SLC16)

KX-TDA0175

16-Port Single Line Telephone Extension with Message
Lamp Card (MSLC16)

Other Cards

KX-TDA0166

16-Channel Echo Canceller Card (ECHO16)

KX-TDA0410

CTI Link Card (CTI-LINK)

Optional SD Memory
Cards

KX-TDA0820

SD Memory Card for Software Upgrade

KX-TDA0920

SD Memory Card for Software Upgrade to Enhanced
Version

KX-TDA6920

SD Memory Card for Software Upgrade to Enhanced
Version

Activation Key Code

KX-NCS4910

Activation Key for Software Upgrade to Enhanced
Version (Software Upgrade 01)

PSU

KX-TDA0108

S-Type Power Supply Unit (PSU-S)

Equipment Compatibility

Compatible Panasonic Proprietary Telephones

The PBX supports the following telephones:

•

IP proprietary telephones (e.g., KX-NT300 series)

•

IP softphones (e.g., KX-NCS8100)

•

Digital proprietary telephones (e.g., KX-DT300 series)

•

Analogue proprietary telephones (e.g., KX-T7700 series)

•

Portable stations (e.g., KX-TCA355, KX-TCA256, KX-TD7690)

•

DSS consoles (e.g., KX-DT390)

•

Single line telephones (e.g., KX-T7710)

Incompatible Panasonic Proprietary Telephones

The PBX does not support the following telephones:

•

KX-T30800 series proprietary telephones and DSS consoles

•

KX-T61600 series proprietary telephones and DSS consoles

•

KX-T123200 series proprietary telephones and DSS consoles

•

KX-TD7500 DECT portable station

Note

•

For the equipment (e.g., Add-on Key Module, USB Module, Headset

) that can be connected to a

particular telephone, refer to the telephone's manual.

•

For other equipment that can be connected to the PBX, refer to "1.1.3 System Connection Diagram".

The KX-T7090 headset can be connected to the KX-T7000, KX-T7200, KX-T7300, KX-T7400, and KX-T7500 (except for
KX-T7560/KX-T7565) series telephones.

Installation Manual

System Components

Summary of Contents for KX-TDE600



































































































































































































































































Search results

Summary of Contents for KX-TDE600

Reviews:

Panasonic KX-TDE600, Installation Manual, Page: 6 / 258

Search results

Summary of Contents for KX-TDE600

Reviews: