manualshive.com logo in svg

Panasonic KX-TDE600, Installation Manual, Page: 145 / 258

Share
Download
Panasonic KX-TDE600 Installation Manual Download Page 145

3.7  Information about the Physical Trunk Cards

3.7.1  ELCOT16 Card (KX-TDA6181)

Function

16-port analogue trunk card with 4 power failure transfer (PFT) ports. A maximum of 2 CID8 cards, 2 CID/
PAY8 cards, or one of each can be mounted on the ELCOT16 card (refer to "3.7.3  CID/PAY8 Card
(KX-TDA0189)" and "3.7.4  CID8 Card (KX-TDA0193)").

Amphenol

To trunk

LED

Accessories and User-supplied Items

Accessories (included):

 Screws 

´

 2

User-supplied (not included):

 Amphenol connector

Note

•

To connect the Amphenol connector, refer to "3.2.16  Fastening an Amphenol Connector".

•

For details about power failure transfer, refer to "3.14.1  Power Failure Connections".

•

To confirm the trunk connection, refer to "Confirming the Trunk Connection" in "3.15.1  Starting the
PBX".

Installation Manual

145

3.7.1 ELCOT16 Card (KX-TDA6181)

Summary of Contents for KX-TDE600



































































































































































































































































Reviews:

No comments