manualshive.com logo in svg

Panasonic KX-TDE200, Installation Manual

The Panasonic KX-TDE200 is a versatile and powerful communication system. With its numerous features and capabilities, it's essential to have the Operator User Manual to maximize its potential. Download this manual for free from our website and unlock the full potential of your Panasonic KX-TDE200.

Share
Download
background image

3.2.7  Installing/Removing the Optional Service Cards

CAUTION

•

To protect the back board from static electricity, do not touch parts on the back board in the main unit
and on the optional service cards. To discharge static electricity, touch ground or wear an earthing
strap.

•

When installing or removing the IPCMPR card, the DC power supply must be turned off.

Note

The optional service cards can be installed or removed while the DC power is supplied.

Installing Optional Service Cards

1.

Insert the card along the guide rails.

Guide Rail

2.

Holding the card as shown below, push the release lever in the direction of the arrow so that the card
engages securely with the connector on the back board.

Release Lever

Back Board

Installation Manual

61

3.2.7 Installing/Removing the Optional Service Cards

Summary of Contents for KX-TDE200













































































































































































































Reviews:

No comments

Related manuals for KX-TDE200

Telco Depot TD100 SERIES User Manual preview
TD100 SERIES
Brand: Telco Depot Pages: 71

Brands by name

Popular brands

Load more brands