Panasonic KX-TDE200, Installation Manual

Page: 10 / 204

Important Information
SAVE THESE INSTRUCTIONS
WARNING
SAFETY REQUIREMENTS
For All Telephone Equipment
•
Do not install the product in any other way than described in relevant manuals.
•
The product must only be installed and serviced by qualified service personnel. The product should be
used as-is from the time of purchase; it should not be disassembled or modified. Disassembly or
modification can cause a fire, electric shock, or damage to the product.
•
Do not install the product in a place exposed to rain or moisture, or a place where water, oil, or other liquids
can drip or splash onto on the product. Such conditions can lead to fire or electric shock, and may impair
the performance of the product.
•
Follow all warnings and instructions marked on the product.
•
Do not place the product on an unstable or uneven surface. If the product were to fall over, it may cause
injury or damage to the product.
•
Products that require a power source should only be connected to the type of electrical power supply
specified on the product label. If you are not sure of the type of power supply to your home, consult your
dealer or local power company.
•
For safety purposes some products are equipped with an earthed plug. If you do not have an earthed outlet,
please have one installed. Do not bypass this safety feature by tampering with the plug.
•
Do not supply power to a combination of devices that exceeds the total rated capacity of the wall outlets
or extension cables used. If outlets, power strips, extension cords, etc. are used in a manner that exceeds
their rated capacity, they emit large amounts of heat, which could cause a fire.
•
Unplug the product from the wall outlet and have it serviced by qualified service personnel in the following
cases:
a.
When the power supply cord or plug is damaged or frayed.
b.
If liquid has been spilled into the product.
c.
If the product has been exposed to rain or water.
d.
If the product does not operate according to the operating instructions. Adjust only the controls that are
explained in the operating instructions. Improper adjustment of other controls may result in damage
and may require service by a qualified technician to restore the product to normal operation.
e.
If the product has been dropped or the cabinet has been damaged.
f.
If product performance deteriorates.
For the PBX
•
If damage to the unit exposes any internal parts, disconnect the power supply cord immediately and return
the unit to your dealer.
•
To prevent fires, electric shock, injury, or damage to the product, be sure to follow these guidelines when
performing any wiring or cabling:
a.
Before performing any wiring or cabling, unplug the product's power cord from the outlet. After
completing all wiring and cabling, plug the power cord back into the outlet.
b.
When laying cables, do not bundle the product's power cord with the power cords of other devices.
c.
Do not place any objects on top of the cables connected to the PBX.
d.
When running cables along the floor, use protectors to prevent the cables from being stepped on.
e.
Do not run any cables under carpeting.
10 Installation Manual
Important Information