2.2 Programming
24
Programming Guide
2.2.4
VoIP Gateway/IP-PBX Interface Parameters
1.
Click
1.4 VoIP Gateway/IP-PBX Interface Settings
in the main menu.
2.
Assign each parameter referring to the descriptions below.
At any time during the session, you can:
•
Click
ALL CLEAR
to reset all parameters to the default values.
•
Click
MENU
to return to the main menu (see "2.1 Main Menu for the Administrator").
•
Click
LOGOUT
to log out from the IP-GW4 Maintenance Utility (see "2.5.2 Log Out").
3.
Click
OK
.
You will see a confirmation screen.
Note
If your entry contains an invalid value, you will see an error screen. Click
OK
and try
again with correct values.
4.
Confirm your entry and click
OK
.
To return to the previous screen, click
CANCEL
.
Parameter Descriptions
Dialing Settings
The parameters indicated with "
*
" must be changed while the VoIP Gateway Card is in the "STOP"
status (see "2.3.1 Status Control"). The changes do not have to be followed by a reboot to become
effective.
Parameter & Description
Default
Value Range
*
First Digit Time (s) 5-30s
Specifies the length of time (in seconds) within which
the first digit of a dial number must be dialed after
seizing a VoIP gateway trunk (CO line).
Generally, there is no need to change the default value.
20
5 to 30
