manualshive.com logo in svg

Panasonic KX-TDA50, User Manual

Share
Download
Panasonic KX-TDA50 User Manual Download Page 75

1.5 Absence Settings

User Manual

75

1.5.2

Absent Message

You can show the reason you do not answer, if the caller uses a Panasonic display proprietary telephone. 
There are eight preprogrammed messages and one for your personal message (16 characters). The 
selected message is shown on the display of your telephone.

•

The system has two modes: (1) FWD/DND Cycle Switch Mode and (2) FWD/DND Setting Mode. 
Ask your manager what mode your system is in if you are not sure.

(1)

When in the FWD/DND Cycle Switch Mode

:

Pressing the FWD/DND button (fixed button) while in idle status will cycle the setting as 
shown below:

(2)

When in the FWD/DND Setting Mode

:

Pressing the FWD/DND button (fixed button) while in idle status will take you directly to the 
programming mode for the FWD/DND setting.
(Refer to "3.1.2 Settings on the Programming Mode".)

Note

A FWD/DND button (customized button) is always in FWD/DND Cycle Switch Mode: the 
mode cannot be changed.

•

Transferred outside calls are also forwarded to the destination assigned for outside calls.

•

When intercom calls are set to be handled differently from outside calls (forwarding type, forward 
destination), we recommend establishing buttons for both FWD/DND—Outside calls and FWD/
DND—Intercom calls, and/or Group FWD—Outside calls and Group FWD—Intercom calls, 
because:

a)

the light patterns of the FWD/DND—Both calls button (including FWD/DND button [fixed 
button]) and the Group FWD—Both calls button will indicate the setting for either outside 
calls or intercom calls, but not both.

Note

The FWD icon on PS display reflects the setting for outside calls only.

b)

pressing the FWD/DND—Both calls button (including FWD/DND button [fixed button]) or the 
Group FWD—Both calls button will not change the FWD or DND mode for intercom calls and 
outside calls separately.

Customizing Your Phone

•

3.1.3 Customizing the Buttons 
Create or edit FWD/DND (Both calls, Outside calls, Intercom calls) buttons, or Group FWD 
(Both calls, Outside calls, Intercom calls) buttons.

Message no.

Message (Example)

1

Will Return Soon

2

Gone Home

3

At Ext %%%%

 (Extension number)

4

Back at %%:%%

 (Hour:Minute)

FWD

DND

Off

Summary of Contents for KX-TDA50

















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands