Panasonic KX-TDA50 Installation Manual Download Page 22

Page: 22 / 160

1.3 Options

Installation Manual

KX-TDA5196

Remote Card (RMT)

Analog modem card for remote communication
with the Hybrid IP-PBX. ITU-T V.90 support.

KX-TDA5480

4-Channel VoIP Gateway
Card (IP-GW4)

4-channel VoIP gateway card. Compliant with
VoIP H.323 V.2 protocol, and ITU-T G.729a,
G.723.1, and G.711 CODEC methods.

KX-TDA5920

SD Memory Card for
Software Upgrade to
Enhanced Version

Optional SD Memory Card to upgrade the
Hybrid IP-PBX with MPR version 1 or 1.1 to
version 2.0, and for NDSS feature and CTI
enhancement.

KX-A236

Additional AC Adaptor

AC adaptor and AC cord for system expansion.

The PT-interface CS can be connected to the Hybrid IP-PBX using a cable like a PT.

One LCOT4 card is installed by default. Two more LCOT4 cards can be optionally installed in the Hybrid IP-PBX.

Model No.

Model Name

Description

Maximum

Quantity

Summary of Contents for KX-TDA50

































































































































































Search results

Summary of Contents for KX-TDA50

Reviews:

Brands by name

Popular brands

Panasonic KX-TDA50, Installation Manual

Search results

Summary of Contents for KX-TDA50

Reviews:

Brands by name

Popular brands