manualshive.com logo in svg

Panasonic KX-TDA50, Installation Manual

Share
Download
Panasonic KX-TDA50 Installation Manual Download Page 128

3.3 Installation of the Hybrid IP-PBX PC Programming Software

128

Installation Manual

Installing the KX-TDA50 Maintenance Console

Notes

•

Make sure to install and use the KX-TDA50 Maintenance Console for MPR version 2.0.

•

To install or uninstall the software into Windows 2000 Professional or Windows XP Professional, 
the user must be grouped either of "Administrators" or "Power Users".

•

When the Hybrid IP-PBX is first connected to the PC via USB, a wizard should appear and ask you 
to select the appropriate USB driver. Browse for and select the KX-TDA USB driver, which is copied 
to the local drive during installation.

Starting the KX-TDA50 Maintenance Console and Assigning the Basic 
Items (Quick Setup)

When you start the KX-TDA50 Maintenance Console with the Installer Level Programmer Code and connect 
to the Hybrid IP-PBX for the first time after initialization (with the factory default setting), Quick Setup will 
launch automatically. During Quick Setup, you will setup the following basic items:

•

Date and Time of the Hybrid IP-PBX. The date and time set on the PC will be used.

•

System Password for installer for PC programming.

•

Operator extension numbers. Operator extensions for all time modes (day/lunch/break/night) can 
be assigned.

•

Flexible Numbering type to pattern 1 or pattern 2. If pattern 1 (with  ) is selected, " " must prefix 
all feature numbers (except access numbers) when an extension user wants to use a feature.

•

Operator call and Idle Line Access/ARS numbers (0 or 9). The feature numbers for operator call 
and Idle Line Access/ARS can be selected.

•

Remote Maintenance Dial Number. Enter the complete telephone number of the Hybrid IP-PBX 
(including the country code). When necessary, this number will be used to access the Hybrid IP-
PBX from a remote location for maintenance purposes.

1.

Copy the KX-TDA50 Maintenance Console setup file to a 
local drive on the PC. (Its icon is shown here, on the left.)

2.

Double-click the setup file to run the installer.

3.

Follow the on-screen instructions provided by the 
installation wizard.

1.

Connect the PC to the Hybrid IP-PBX with a USB cable.

2.

Start the "

KX-TDA50 Maintenance Console

" from the 

Start menu.

Summary of Contents for KX-TDA50

































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands