manualshive.com logo in svg

Panasonic KX-TDA50, Features Manual, Page: 606 / 668

Share
Download
Panasonic KX-TDA50 Features Manual Download Page 606

4.12 Feature [6]

606

Feature Guide

4.12.7 Tenant [6-6]

A maximum of 8 tenants can share the PBX. The tenant members consist of extension groups. The PBX 
offers each tenant its own Time Table and system resources.

Music on Hold

Specifies the audio source to be used for Music on Hold.

Default

Same as System Setting

Value Range

Same as System Setting, BGM, Tone

Programming References

4.8.4 BGM / Music on Hold [2-3]

Feature Guide References

1.12.4 Music on Hold

2.2.3 Tenant Service

Operator (Extension Number)

Specifies the extension number or floating extension number of an incoming call distribution group to be 
designated as the tenant operator. When this parameter is left unspecified, a PBX operator serves as the 
tenant operator.

Default

Not stored.

Value Range

Max. 4 digits (consisting of 0–9)

Programming References

4.8.3 PBX Operator [2-2]

Feature Guide References

2.2.3 Tenant Service

2.2.5 Operator Features

ARS Mode

Specifies the ARS mode used when making a CO line call.

Default

Same as System Setting

Summary of Contents for KX-TDA50





























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments