Panasonic KX-TDA50, Features Manual

Page: 574 / 668

4.10 Extension [4]
574 Feature Guide
4.10.13 Portable Station—Flexible Key [4-2-3] Flexible Key Data
Copy
The flexible CO button settings of a PS can be copied to different PSs. Select the PS that has the settings
to copy to other PSs from the
Extension Number / Name list, then click Copy To .
Destination Extension Line
Select the number and name of the PS that will receive the copied settings. Multiple PSs can be selected.
To select all PSs at once, click
Select All .
Programming References
4.10.12 Portable Station—Flexible Key [4-2-3]
Feature Guide References
None
4.10.14 Portable Station—NDSS Link Data - Send [4-2-4]
It is possible to cancel the transmission of an extension's status data over the network. Select the desired
extension from the
Extension Number / Name list.
Network BLF Data to NDSS Key of Other PBX - Other PBX (Network PBX
ID=1)
Selects whether extension status data is transmitted over the network for the selected extension. This
setting can only be changed from
ON to OFF , to cancel data transmission.
Default
OFF
Value Range
OFF, ON
Programming References
4.15.4 NDSS Key Table [9-4]
Feature Guide References
1.25.2.3 Network Direct Station Selection (NDSS) (KX-TDA5920 required)
4.10.15 DSS Console—Main [4-3-1]
A DSS Console can be used in conjunction with a PT. A maximum of 4 DSS Consoles can be programmed.
The
PT Property–Type of the extension port that DSS Console is connected must be set to DSS in
Extension Port [1-5] .