Panasonic KX-TDA50, Features Manual

Page: 447 / 668

4.9 Groups [3]
Feature Guide 447
4.9 Groups [3]
4.9.1 Trunk Group—TRG Settings [3-1-1]
CO lines are grouped into CO line groups. The settings of the CO line groups determine the settings of their
CO lines. A maximum of 64 CO line groups can be programmed.
Main
Group Name
Specifies the name of the CO line group for programming reference. As for the available characters, refer
to the character code table described in section 3.2.1 Installing and Starting KX-TDA50 Maintenance
Console.
Default
Not stored.
Value Range
Max. 20 characters
Programming References
4.16.1 CO Line Setting [10-1]
Feature Guide References
2.2.2 Group
COS
Specifies the COS of the CO line group that applies when making a call from a CO line to another CO line
by TIE Line Service.
Default
1
Value Range
1–64
Programming References
4.8.15 Class of Service—COS Settings [2-7-1]
4.16.1 CO Line Setting [10-1]
Feature Guide References
1.25.1.2 PBX Code Method (Access with PBX Code)
1.25.1.3 Extension Number Method (Access without PBX Code)
2.2.2 Group