Panasonic KX-TDA50, Features Manual

Page: 419 / 668

4.8 System [2]
Feature Guide 419
Programming References
4.16.1 CO Line Setting [10-1]—Trunk Group Number
4.10.1 Wired Extension—Extension Settings [4-1-1]—Main—Ring Pattern Table
4.10.9 Portable Station—Extension Settings [4-2-1]—Main—Ring Pattern Table
Feature Guide References
1.1.3.2 Ring Tone Pattern Selection
4.8.19 Ring Tone Patterns—Call from Doorphone [2-8-2]
Different ring tone patterns can be selected for incoming doorphone calls depending on the doorphone ports
the calls come through. A maximum of 8 Ring Tone Pattern Tables can be programmed, and any pattern
table can be selected for use by an extension.
Ring Tone Pattern Table 1–8
Specifies the ring tone pattern for incoming doorphone calls.
Default
Triple
Value Range
Single, Double, Triple, S-Double
Programming References
4.10.1 Wired Extension—Extension Settings [4-1-1]—Main—Ring Pattern Table
4.10.9 Portable Station—Extension Settings [4-2-1]—Main—Ring Pattern Table
4.11.1 Doorphone [5-1]
Feature Guide References
1.1.3.2 Ring Tone Pattern Selection
4.8.20 Ring Tone Patterns—Call from Others [2-8-3]
Different ring tone patterns can be selected for incoming intercom calls and ringing triggered by certain PBX
features (Timed Reminder, Call Back, and Live Call Screening). A maximum of 8 Ring Tone Pattern Tables
can be programmed, and any pattern table can be selected for use by an extension.
Extension—Ring Tone Pattern Table 1–8
Specifies the ring tone pattern for incoming intercom calls.
Default
Double