Panasonic KX-TDA50, Features Manual

Page: 31 / 668

1.2 Receiving Group Features
Feature Guide 31
[Available Destination]
The following can be used as overflow destinations assigned to an idle extension hunting group.
• FWD/DND Mode
While searching for an idle extension, any extension which has set FWD—All Calls or DND will be
skipped.
Feature Guide References
1.3.1 Call Forwarding (FWD)/Do Not Disturb (DND)
1.2.2 Incoming Call Distribution (ICD) Group Features
1.2.2.1 Incoming Call Distribution (ICD) Group Features—
OVERVIEW
Description
An incoming call distribution (ICD) group is a group of extensions which is assigned a floating extension
number. This floating extension number allows extensions in the group to answer calls directed to the group,
as opposed to calls directed to just a single extension. ICD groups and their member extensions can be
programmed in a variety of ways to handle incoming calls as desired.
The number of agents (extensions which can handle calls at the same time) is programmable for each ICD
group, and each group can be assigned a distribution method used to distribute incoming calls to its agents.
Once all agents are busy, additional calls can be placed in a queue as they are received. When the number
of calls in the queue reaches a specified limit, they can be redirected to another destination.
Additionally, an extension assigned as the group's supervisor extension can monitor the statistics of calls
Destination Availability
Wired Extension (PT/SLT)
PS
ICD Group
PS Ring Group
VM Group (DTMF/DPT)
External Pager (TAFAS)
DISA
Analog Remote Maintenance
Idle Line Access no. + Phone no.
CO Line Group Access no. + CO Line Group no. +
Phone no.
Extension of Another PBX (via TIE Line, Access with PBX Code)
Extension of Another PBX (via TIE Line, Access without PBX Code)