Panasonic KX-TDA50, Features Manual

Page: 181 / 668

1.24 Audible Tone Features
Feature Guide 181
1.24.2 Confirmation Tone
Description
At the end of feature operations, the PBX confirms the success of the operation by sending a confirmation
tone to extension users.
Conditions
• Confirmation Tone Patterns
All confirmation tone patterns have a default (
→
5.2.1 Tones/Ring Tones).
• It is possible to eliminate each tone.
Type Description
Tone 1 a)
Sent when the setting is accepted.
b)
Sent when a call is received in voice-calling mode (Alternate
Receiving—Ring/Voice). The caller's voice will be heard after the tone.
Tone 2 a)
Sent from an external paging device or an extension before being
paged.
b)
Sent when a call is received while an extension is in Hands-free
Answerback mode.
Tone 3-1 a)
Sent before a conversation is established using the Paging feature.
b)
Sent to the caller when a conversation is established with an extension
in one of the following modes:
• Hands-free Answerback mode
• Voice-calling mode (Alternate Receiving—Ring/Voice)
Tone 3-2 Sent before a conversation is established when accessing the following
features by their feature numbers:
• Call Park Retrieve
• Call Pickup
• Hold Retrieve
• Paging Answer
• Trunk Answer From Any Station (TAFAS)
Tone 4-1 Sent when a call changes from a two-party call to a three-party call. (For
example, Executive Busy Override, Conference, Privacy Release, Two-way
Record.)
Tone 4-2 Sent when a call changes from a three-party call to a two-party call. (For
example, Executive Busy Override, Conference, Privacy Release, Two-way
Record.)
Tone 5 Sent when a call is placed on hold (including a consultation hold).