Panasonic KX-TDA50, Features Manual

Page: 179 / 668

1.23 Extension Controlling Features
Feature Guide 179
record messages. (
→
1.15.5 Outgoing Message (OGM)) A different message can be assigned for each
time mode (
→
2.2.4 Time Service).
Installation Manual References
2.5.3 MSG2 Card
User Manual References
1.7.1 Timed Reminder
2.1.6 Hospitality Features
1.23.5 Remote Extension Control by User
Description
Extension users can remotely change the feature settings, such as Call Forwarding (FWD), and time service
mode for their own extensions from inside or outside the PBX using Direct Inward System Access (DISA)
(
→
1.15.6 Direct Inward System Access (DISA)). This feature can be used only on the extensions which,
through Class of Service (COS) programming are allowed to be controlled remotely.
The following feature settings can be changed:
a)
FWD/Do Not Disturb (DND) (
→
1.3.1 Call Forwarding (FWD)/Do Not Disturb (DND))
b)
Log-in/Log-out (
→
1.2.2.6 Log-in/Log-out)
c)
Absent Message (
→
1.17.2 Absent Message)
d)
Extension Dial Lock (
→
1.8.2 Extension Dial Lock)
e)
Time Service—Changing the Time Mode (day/lunch/break/night) (
→
2.2.4 Time Service)
This feature is also known as Remote Station Control by User.
Conditions
• Extension PIN
An extension personal identification number (PIN) (
→
Extension Personal Identification Number (PIN)
[005]) is required to use this feature. (
→
1.23.1 Extension Personal Identification Number (PIN)) If the
PIN is entered incorrectly three times, the line will be disconnected.
• Internal Call Block (
→
1.1.2.2 Internal Call Block) also determines which extensions can perform
remote operations on which extensions, i.e., if extension 101 cannot call extension 201, then it cannot
remotely operate extension 201 either.
User Manual References
1.2.8 Remote Setting