1.12 Holding Features
Feature Guide
105
•
Retry
If the specified parking zone is occupied or there is no vacant zone for Automatic Call Park, the
originator will hear a busy tone. Retrying is possible while hearing a busy tone by selecting another
parking zone or a vacant zone.
•
Call Park Recall
If a parked call is not retrieved within a preprogrammed time period, the Call Park Recall tone will be
heard at the Transfer Recall destination assigned to the extension which parked the call. If the
destination is engaged in a call, the Hold Alarm will be heard.
•
If a parked CO line call is not retrieved within a preprogrammed time period (Default: 30 minutes), it is
automatically disconnected.
•
Call Park Button
Pressing the Call Park button parks or retrieves a call in a preset parking zone.
Any flexible button can be customized as the Call Park button. It shows the current status of the preset
parking zone as follows:
•
Call Park (Automatic Park Zone) Button
Pressing the Call Park (Automatic Park Zone) button parks a call in an idle parking zone automatically.
Any flexible button can be customized as the Call Park (Automatic Park Zone) button.
•
Call Park Retrieve Deny
Internal Call Block (
→
1.1.2.2 Internal Call Block) also determines which extensions' calls an extension
user can retrieve from a parking zone, i.e., if extension 101 cannot call extension 201, then it cannot
retrieve extension 201's parked calls either.
Feature Guide References
User Manual References
1.12.3 Call Splitting
Description
An extension user can speak alternately with two parties, similar to conventional call waiting. Placing the
current call on hold allows the user to speak with the other party.
Conditions
•
Consultation Hold
While having a conversation with one party, the other party is on consultation hold. (
→
Light pattern
Status
Slow red flashing
A call is parked in the preset parking zone
Off
There are no parked calls
Summary of Contents for KX-TDA50
