manualshive.com logo in svg

Panasonic KX-TDA50, Feature Manual

Share
Download
Panasonic KX-TDA50 Feature Manual Download Page 96

a.

Has set Executive Busy Override Deny or Data Line Security (

®

 4.1.1  Data Line Security).

b.

Is being monitored by another extension (

®

 3.1.4  Call Monitor).

c.

Is receiving an Off-hook Call Announcement (OHCA) (

®

 12.1.3  OHCA (Off-hook Call

Announcement)) or Whisper OHCA (

®

 20.1.3  Whisper OHCA).

d.

Is on a conference call (

®

 3.1.16  Conference, 

®

 13.1.12  Privacy Release).

e.

Is on a doorphone call (

®

 4.1.11  Doorphone Call).

f.

Is using Live Call Screening (LCS) or Two-way Record (

®

 19.1.4  Voice Mail DPT (Digital)

Integration).

g.

Has a call on consultation hold (

®

 4.1.7  DISA (Direct Inward System Access)).

•

This feature is not available for a CO-to-CO line call via Direct Inward System Access (DISA).

[One-touch Executive Busy Override (KX-TDA50 only)]

•

Automatic Callback Busy cannot be used on CO lines that have this feature enabled (

®

 1.1.4  Automatic

Callback Busy (Camp-on)).

PC Programming Manual References

4.8  [2-6-1] Numbering Plan—Main—Features—

Executive Override Deny Set / Cancel

4.10  [2-6-3] Numbering Plan—B/NA DND Call Feature—

Executive Busy Override

4.11  [2-7-1] Class of Service—COS Settings

→CO & SMDR—

Executive Busy Override

→Extension Feature—

Executive Busy Override Deny

4.17  [2-9] System Options—Option 1—

PT Operation—One-touch Busy Override by SCO key (KX-TDA50

only)
6.1  [4-1-1] Wired Extension—Extension Settings—Option 3—

Executive Override Deny

6.10  [4-2-1] Portable Station—Extension Settings—Option 3—

Executive Override Deny

PT Programming Manual References

[505] Executive Busy Override
[506] Executive Busy Override Deny

Feature Manual References

3.1.20  COS (Class of Service)

Operating Manual References

1.3.24  Executive Busy Override

5.1.4  Extension Dial Lock

Description

An extension user can change the Toll Restriction (TRS) level of the telephone (

®

 17.1.6  TRS (Toll

Restriction)) so that other users cannot make inappropriate CO line calls. An extension personal identification
number (PIN) is used to unlock the telephone (

®

 5.1.6  Extension PIN (Personal Identification Number)).

This feature is also known as Electronic Station Lockout.

96

Feature Manual

Document Version  2010-11  

5.1.4 Extension Dial Lock

Summary of Contents for KX-TDA50

































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands