Panasonic KX-TDA50, Feature Manual

Page: 269 / 384

→ Name
→ CO Line Access Telephone Number
6.1 [4-1-1] Wired Extension—Extension Settings—Main— Extension Name
6.10 [4-2-1] Portable Station—Extension Settings—Main— Extension Name
PT Programming Manual References
[001] System Speed Dialing Number
[002] System Speed Dialing Name
[004] Extension Name
13.1.27 PS—Feature Buttons
Description
Although a portable station (PS) does not feature as many buttons as a proprietary telephone (PT), a PS can
be customized to give a PS user access to PBX features, just as the flexible buttons on a PT can be customized.
(
®
6.1.3 Flexible Buttons)
13.1.28 PS—Ring Group
Description
A PS ring group is a way for several portable stations (PSs) to be notified of an incoming call simultaneously,
while using only one channel of a cell station (CS).
Normally when a PS receives a call, one channel of a CS is used to ring the PS (
®
13.1.24 PS (Portable
Station)). If several PSs are members of an incoming call distribution (ICD) group, the available channels of a
CS will become busy just by ringing each PS. Assigning a group of PSs to a PS ring group alleviates this strain
on the CS because only one channel is needed to ring a PS ring group’s members.
PS ring group members and related parameters are assigned through system programming, as explained
below.
a.
Floating Extension Number: When this number is called, all PSs in the group ring.
b.
Group Name: Can be displayed on a ringing PS to indicate that the incoming CO line call is a group call,
and not a call directed to the PS’s extension number. This is only available when Incoming CO Line Call
Information Display is set to "
Called Number
".
c.
Incoming CO Line Call Information Display: Determines which information is shown on the PS display
when a group call is received. Select "
Caller ID
" to display the caller’s telephone number or name, or
"
Called Number
" to display the name of the PS ring group which is receiving the call.
d.
Member PSs: Select each PS that will be a member of the corresponding PS ring group. Note that a PS
can belong to more than one PS ring group.
Document Version 2010-11 Feature Manual 269
13.1.28 PS—Ring Group