manualshive.com logo in svg

Panasonic KX-TDA50, Feature Manual

Share
Download
Panasonic KX-TDA50 Feature Manual Download Page 209

13.1.3  Password Security

Description

To maintain system security, system passwords are required to access certain programming functions of the
PBX. By giving different users access to different passwords, it is possible to control the amount of
programming that each user is able to perform.
The following types of system passwords are available:

Password

Description

Format

PT

System Password
(PT) for User

Used to access user-level PT programming. The specific
PT programming items that may be programmed at user
level can be selected through system programming item.

4 – 10
digits

System Password
(PT) for
Administrator

Used to access administrator-level PT programming. All PT
programming settings are available.

PC

System Password
(PC) for User

Used with the user-level programmer code to access
user-level PC programming. The installer can specify
which system programming settings are available.

4 – 10
charact
ers

System Password
(PC) for
Administrator

Used with the administrator-level programmer code to
access administrator-level PC programming. The installer
can specify which system programming settings are
available.

System Password
(PC) for Installer

Used with the installer-level programmer code to access
installer-level PC programming. All system programming
settings are available.

The three programmer codes used for PC programming can be set through Maintenance Console. For more
information about programmer codes, see Section 2.1.2  Access Levels in the PC Programming Manual. The
required format of each code is as follows:

Item

Length

User Level Programmer Code

0 – 16 characters

Administrator Level Programmer Code

4 – 16 characters

Installer Level Programmer Code

4 – 16 characters

CAUTION

To the Administrator or Installer regarding the system password

1.

Please provide all system passwords to the customer.

2.

To avoid unauthorized access and possible abuse of the PBX, keep the passwords secret, and inform
the customer of the importance of the passwords, and the possible dangers if they become known to
others.

3.

The PBX has default passwords preset. For security, change these passwords the first time that you
program the PBX.

4.

Change the passwords periodically.

5.

It is strongly recommended that passwords of 10 numbers or characters be used for maximum
protection against unauthorized access. For a list of numbers and characters that can be used in system
passwords, refer to Section 1.1.2  Entering Characters in the PC Programming Manual.

6.

If a system password is forgotten, it can be found by loading a backup of the system data into a PC,
and checking the password using the Maintenance Console software. If you do not have a backup of

Document Version  2010-11  

Feature Manual

209

13.1.3 Password Security

Summary of Contents for KX-TDA50

































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands