Panasonic KX-TDA50, Feature Manual

Page: 102 / 384

2.12.1 Connection of Doorphones, Door Openers, External Sensors, and External Relays
PC Programming Manual References
3.31 [1-1] Slot—Card Property - DPH type (KX-TDA50 only)— For Output (EIO)—Device Type
4.8 [2-6-1] Numbering Plan—Main—Features— External Relay Access
4.11 [2-7-1] Class of Service—COS Settings—Extension Feature— External Relay Access
7.6 [5-4] External Relay
Feature Manual References
3.1.20 COS (Class of Service)
Operating Manual References
1.3.28 External Relay
5.1.9 External Sensor
Description
External sensing devices, such as security alarms or smoke detectors, can be connected to the PBX. When
the PBX receives input from a sensor, a call is made to the preset destination, alerting the extension user.
The available destinations of a sensor call are as follows:
[Available Destinations]
Destination Availability
Wired Extension (PT/SLT/T1-OPX) ü
PS ü
ICD Group
PS Ring Group
Floating Extension no. for SVM
VM Group (DTMF/DPT)
External Pager (TAFAS)
DISA
Analog/ISDN Remote Maintenance
Idle Line Access no. + Phone no.
Trunk Group Access no. + Trunk Group no. + Phone no.
Extension of Another PBX (via TIE Line, Access with PBX Code)
Extension of Another PBX (via TIE Line, Access without PBX Code)
When the call is answered, if distinctive dial tones are enabled, dial tone 3 is heard, which continues until the
user goes on-hook. If the sensor call is not answered within a specified time, the call will be canceled. It is
102 Feature Manual Document Version 2010-11
5.1.9 External Sensor