2.2 Programming
26
Programming Guide
2.2.5
Hunt Pattern Parameters
1.
Click
1.5 Hunt Pattern (for Incoming Calls)
in the main menu.
2.
Assign each parameter referring to the descriptions below.
At any time during the session, you can:
•
Click
ALL CLEAR
to reset all parameters to the default values.
•
Click
MENU
to return to the main menu (see "2.1 Main Menu for the Administrator").
•
Sort the hunt patterns in the table at the bottom of the screen:
a.
Click the desired sort key and sort order from the
Sort Option
lists.
b.
Click
SORT
.
•
Delete the desired hunt pattern from the table at the bottom of the screen:
a.
Select the appropriate check box for the hunt pattern you want to delete.
b.
Click
DELETE
.
•
Click
LOGOUT
to log out from the IP-GW4 Maintenance Utility (see "2.5.2 Log Out").
3.
Click
ENTRY
.
A maximum of 16 hunt patterns can be created.
4.
Click
OK
.
You will see a confirmation screen.
Note
If your entry contains an invalid value, you will see an error screen. Click
OK
and try
again with correct values.
5.
Confirm your entry and click
OK
.
To return to the previous screen, click
CANCEL
.
