2.2 Programming
Programming Guide
13
2.2.2
H.323 Parameters
1.
Click
1.2 H.323 Detailed Settings
in the main menu.
2.
Assign each parameter referring to the descriptions below.
At any time during the session, you can:
•
Click
ALL CLEAR
to reset all parameters to the default values.
•
Click
MENU
to return to the main menu (see "2.1 Main Menu for the Administrator").
•
Click
LOGOUT
to log out from the IP-GW4 Maintenance Utility (see "2.5.2 Log Out").
3.
Click
OK
.
You will see a confirmation screen.
Note
If your entry contains an invalid value, you will see an error screen. Click
OK
and try
again with correct values.
4.
Confirm your entry and click
OK
.
To return to the previous screen, click
CANCEL
.
