Panasonic KX-TDA150, Installation Manual

Page: 142 / 158

Installing the Maintenance Console
Note
•
Make sure to install and use the latest version of the Maintenance Console.
•
To install or uninstall the software on a PC running Windows XP Professional, you must be logged in
as a user in either the "Administrators" or "Power Users" group.
•
To install or uninstall the software on a PC running Windows Vista Business or Windows 7 Professional,
you must be logged in as a user in the "Administrators" group.
•
To connect the PC to the PBX via USB, the KX-TDA USB driver must be installed. Follow the
instructions of the wizard to install the KX-TDA USB driver. When the PBX is first connected to the PC
via USB, you may be asked to select the appropriate USB driver. Browse for and select the KX-TDA
USB driver that was installed previously.
1.
Copy the setup file of the Maintenance Console to your PC.
2.
Double-click the setup file to run the installer.
3.
Follow the on-screen instructions provided by the installation wizard.
Starting the Maintenance Console and Assigning the Basic Items (Quick
Setup)
When you start the Maintenance Console with the Installer Level Programmer Code and connect to the PBX
for the first time after initialisation (with the factory default setting), Quick Setup will launch automatically. During
Quick Setup, you will set up the basic items. For details about the basic items, refer to "2.3.4 Quick Setup" in
the Feature Guide.
1. Connect the PC to the PBX with a USB cable.
2. Start the Maintenance Console from the Start menu.
3. "Information before programming" appears.
a.
Carefully read this important additional information,
which includes updates to this and other manuals.
b.
Click OK to close this window.
4. a.
Enter the Installer Level Programmer Code (default:
INSTALLER ).
The Programmer Code authorises different
programming levels, and the Quick Setup is only
available when you start the Maintenance Console
with the Installer Level Programmer Code.
Note
There are 2 other Programmer Codes with limited
authorisation: Administrator Level (default:
ADMIN ), and User Level (default: USER ).
b.
Click OK .
5. Click Connect .
142 Installation Manual
3.3.1 Installing and Starting the Maintenance Console