manualshive.com logo in svg

Panasonic KX-TDA15, Features Manual, Page: 194 / 420

Share
Download
Panasonic KX-TDA15 Features Manual Download Page 194

1.15 Optional Device Features

194

Feature Guide

1.15.8 Built-in Simplified Voice Message (SVM)

Description

Installing an optional Simplified Voice Message (SVM) card in the PBX allows the PBX to provide answering 
machine features.

Features for an extension user with a message box:

An extension user can record a personal greeting message to greet a caller and ask him to leave a voice 
message. The user can also play back and clear greeting messages and the voice messages left by callers.

Feature for a caller:

A caller can leave a voice message after hearing the greeting message.

Up to two SVM cards can be installed in the PBX. Each card is assigned a floating extension number 
(default: 591 for SVM card 1, and 592 for SVM card 2). A card has two channels, allowing two users to 
access a single card at the same time.
When an extension is assigned to an SVM card through system programming, a message box is created 
for that extension. This message box is used to store greeting messages and voice messages for the 
extension. Each PT, SLT, and PS can be assigned its own message box.

[Example]

Message Recording Limit

Up to 125 messages (greeting messages and voice messages for extensions) with a maximum total 
recording time of 60 minutes (default) can be recorded per card. This memory is shared between the 
message boxes of all extensions assigned to that card. The recording quality, which can be selected through 
system programming, determines the total recording time as follows:

If the sum length of all recorded voice messages exceeds 90 % of total space on the SVM card, or 115 or 
more voice messages have been recorded on the card, the display informs all extension users belonging to 
that card that the card is almost full. Users will hear dial tone 3 when going off-hook.

Recording Quality

Recording Time

High

about 40 minutes

Middle

(default)

about 60 minutes

Low

about 120 minutes

PBX

SVM Card 1: Floating Extension No. 591 (default)

SVM Card 2: Floating Extension No. 592 (default)

Message Box for

Extn. 101

Message Box for

Extn. 102

Message Box for

Extn. 103

Message Box for

Extn. 210

Message Box for

Extn. 301

2 CH

2 CH

Summary of Contents for KX-TDA15





































































































































































































































































































































































































































Reviews:

No comments