manualshive.com logo in svg

Panasonic KX-TDA100D, Features Manual

Share
Download
Panasonic KX-TDA100D Features Manual Download Page 296

1.27  Hospitality Features

1.27.1  Hospitality Features—SUMMARY

Description

This PBX has several features that support its use in a hotel-type environment, where extensions correspond
to guest rooms.

Feature

Description & Reference

Room Status Control

An extension designated as the hotel operator can set the check-in
status of rooms remotely.

®

 1.27.2  Room Status Control

Call Billing for Guest Room

Charges for calls from guest rooms can be logged and output as a
guest bill.

®

 1.27.3  Call Billing for Guest Room

Remote Wake-up Call

An extension designated as the hotel operator can set a timed
reminder for a room remotely.

®

 1.28.4  Timed Reminder

SMDR for External Hotel
Application

Hospitality feature data, including check-in, check-out, and timed
reminder times, can be output to SMDR for use in a PC-based hotel
application.

®

 1.26.1  Station Message Detail Recording (SMDR)

296

Feature Guide

1.27.1 Hospitality Features—SUMMARY

Summary of Contents for KX-TDA100D









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands