manualshive.com logo in svg

Panasonic KX-TDA100D, Features Manual

Share
Download
Panasonic KX-TDA100D Features Manual Download Page 230

1.20.4  Display Information

Description

A display PT shows the user the following information while making or receiving calls if they are available:

Display Item

Display Example

Condition

The extension number and name of the
calling or called extension, or incoming call
distribution group

123: Tom Smith

–

Status of the called extension

123: Busy

–

The number and name of the optional device

D02: 1st Door

–

The dialled telephone number

1234567890

–

The received call information

a.

Caller’s name

b.

Caller’s number

c.

Trunk number/name

d.

Original Destination, if the call is
forwarded

e.

DDI/DID/MSN name

ABC Company
12345678
Line 001: Sales

®

102:Mike

Panasonic

The first line message can
be either (a), (c), or (e) at
each extension through
system programming.
These can be displayed in
turn by pressing the
TRANSFER button or
DISP Soft button during a
call.

Call charge fee during a trunk call.

12.35

The currency, position of
the currency symbol, and
the decimal point are
programmable.

Call duration during a trunk call.

Line 001 11:02’28

–

Conditions

•

Multilingual Display

Each extension can select its display language through personal programming (Display Language
Selection).

•

Display Contrast

It is possible to adjust the display contrast through personal programming (Display Contrast Selection).
This is available only for DPTs and IP-PTs.

•

Display Backlight

Some extensions can select whether to turn the display backlight on or off through personal programming
(Display Backlight Selection). For details, refer to the manual for your telephone.

•

Characters (name) or digits (number) exceeding the display’s size limitation are not displayed. In this case,
information which have been programmed is hidden, but not altered.

PC Programming Manual References

4.17  [2-9] System Options—Option 5—

PT Feature Access—No. 1–8

6.1  [4-1-1] Wired Extension—Extension Settings—Option 5

→

Display Language

→

Incoming Call Display

→

Automatic LCD Switch when Start Talking

230

Feature Guide

1.20.4 Display Information

Summary of Contents for KX-TDA100D









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands