manualshive.com logo in svg

Panasonic KX-TDA100D, Features Manual

Share
Download
Panasonic KX-TDA100D Features Manual Download Page 222

1.20  Proprietary Telephone (PT) Features

1.20.1  Fixed Buttons

Description

PTs, DSS Consoles, and Add-on Key Modules are provided with the following feature/Line Access buttons:
Depending on your device type, some buttons may not be provided.
As for buttons on PSs, please refer to the Operating Instructions for each PS.

[PT and Add-on Key Module]

Button

Usage

Navigator Key,
Volume Key

Used to adjust the ringer, speaker, handset and
headset volume and the display contrast. Navigator Key
can also be used to select data from the Call Directory
and the System Feature Access Menu on the display.

VOL

ENTER

Used to confirm the selected item.

CANCEL

Used to cancel the selected item.

PROGRAM

Used to enter and exit the programming mode.

FLASH/RECALL

Used to disconnect the current call and make another
call without hanging up (Flash/Recall mode or
Terminate mode) or used to send a flash/recall signal
to the telephone company or host PBX to access their
features (External Feature Access mode). This button
can also be used as a CANCEL button while on-hook.

HOLD

Used to place a call on hold.

SP-PHONE
(Speakerphone)

Used for hands-free operation. Also used to switch
between handset and hands-free operation.

MESSAGE

Used to leave a message waiting indication or call back
the party who left the message waiting indication.

REDIAL

Used to redial the last dialled number.

222

Feature Guide

1.20.1 Fixed Buttons

Summary of Contents for KX-TDA100D









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands