Panasonic KX-TDA100 KX-TDA200 Installation Manual Download

Page: 24 / 194

1.3 Options

Installation Manual

Note

For the maximum number of optional service cards that can be installed in the Hybrid IP-PBX, refer to
"1.4.3 System Capacity".

KX-TDA0190

Optional 3-Slot Base Card
(OPB3)

Optional 3-slot base card for mounting a maximum of 3
option cards from the following: MSG4, DPH4, or ECHO16
card.

KX-TDA0191

4-Channel Message Card
(MSG4)

4-channel message card. To be mounted on the OPB3 card.

KX-TDA0193

8-Port Caller ID Card (CID8)

8-port Caller ID signal type FSK/FSK (with Call Waiting
Caller ID [Visual Caller ID])/DTMF. To be mounted on the
LCOT8/LCOT16 cards.

KX-TDA0196

Remote Card (RMT)

Analog modem card for remote communication with the
Hybrid IP-PBX. ITU-T V.90 support. To be mounted on the
MPR card.

KX-TDA0290

PRI Card (PRI23)

1-port ISDN Primary Rate Interface card (23B channels). NI
(North American standard ISDN protocol) compliant.

KX-TDA0410

CTI Link Card (CTI-LINK)

Ethernet card for CTI communication via 10BASE-T port.
CSTA Phase 3 protocol compatible.

KX-TDA0470

16-Channel VoIP Extension
Card (IP-EXT16)

16-channel VoIP extension card. Compliant with Panasonic
proprietary protocol, and ITU-T G.729a and G.711 CODEC
methods.

KX-TDA0480

4-Channel VoIP Gateway Card
(IP-GW4)

4-channel VoIP gateway card. Compliant with VoIP H.323
V.2 protocol, and ITU-T G.729a, and G.723.1 CODEC
methods. G3 fax support.

KX-TDA0484

4-Channel VoIP Gateway Card
(IP-GW4E)

4-channel VoIP gateway card. Compliant with VoIP H.323
V.2 protocol, and ITU-T G.729a, G.723.1, and G.711
CODEC methods.

KX-TDA0490

16-Channel VoIP Gateway
Card (IP-GW16)

16-channel VoIP gateway card. Compliant with VoIP H.323
V.2 protocol, and ITU-T G.729a, G.723.1, and G.711
CODEC methods.

KX-TDA0103

L-Type Power Supply Unit
(PSU-L)

Power Supply Unit for KX-TDA200. Total power output of 279
W. Safety Class 1 compliant.

KX-TDA0104

M-Type Power Supply Unit
(PSU-M)

Power Supply Unit for KX-TDA100 and KX-TDA200. Total
power output of 140.4 W. Safety Class 1 compliant.

KX-TDA0108

S-Type Power Supply Unit
(PSU-S)

Power Supply Unit for KX-TDA100. Total power output of 74
W. Safety Class 1 compliant.

KX-TDA0920

SD Memory Card for Software
Upgrade to Enhanced Version

Optional SD Memory Card to upgrade the Hybrid IP-PBX
with software version 1 or 1.1 to version 2.0, and for NDSS
feature and CTI enhancement.

Model No.

Model Name

Description

Summary of Contents for KX-TDA100 KX-TDA200



































































































































































































Search results

Summary of Contents for KX-TDA100 KX-TDA200

Reviews:

Related manuals for KX-TDA100 KX-TDA200

Brands by name

Popular brands

Panasonic KX-TDA100 KX-TDA200, Installation Manual

Search results

Summary of Contents for KX-TDA100 KX-TDA200

Reviews:

Related manuals for KX-TDA100 KX-TDA200

Brands by name

Popular brands