background image

Station Features and Operation (DPT/SLT)

User Manual

267

4.3.82

Trunk Answer From Any Station (TAFAS)

Allows you to answer an incoming outside call, paged through an external pager, from any 
extension.

Conditions

TAFAS can be used in the following cases:

a)

The floating number

*1

 of an external pager is assigned as the Direct in Lines (DIL) 1:1 

destination. In this case all of the incoming calls on the specified line will be signaled.

b)

A DISA (Direct Inward System Access) caller dials the floating number of an external 
pager.

c)

The floating number of an external pager is assigned as the Intercept Routing 
destination. In this case incoming calls redirected to the destination will be signaled.

Confirmation Tone
A confirmation tone is sent to the extension user before being connected to the caller. 
Eliminating the tone is programmable.

Programming Guide References

[407-408] DIL 1:1 Extension —— Day / Night

[409-410] Intercept Extension —— Day / Night

[813] Floating Number Assignment

[990] System Additional Information

Features Guide References

Floating Station

*1

A Floating Number (FN) is a virtual extension number which appears to be an extension. Refer to "Floating Station" in the 
Features Guide.

Any Telephone

Enter an external pager
number
 (1 for KX-TD816 /
1 through 4 for KX-TD1232).

external pager no.

Lift the handset or press
SP-PHONE/MONITOR.

Confirmation
tone (optional)

Dial 42.

4

2

You are connected to the ringing line 
and can talk to the caller.

While hearing a tone from the external pager;

Summary of Contents for KX-TD816C

































































































































































































































































































































































































Reviews: