Panasonic KX-TD816C User Manual Download

Page: 119 / 384

Station Features and Operation (DPT/SLT)

User Manual

119

4.3.10

Call Forwarding — Busy

You can forward calls to another extension when your extension is busy.

Setting

PT and SLT

Lift the handset
or press
SP-PHONE/MONITOR.

For PT: Press FWD/DND.
For PT, SLT: Dial 710.

Hang up or press
SP-PHONE/MONITOR.

Confirmation
tone and
dial tone

Dial 3.

Enter the destination
extension number.

extension no.

For PT, SLT

For PT

FWD/DND

FWD-Busy (

→

ext)

7235 / 7436

FWD/DND

extension no.

Lift the handset or
press SP-PHONE.

Hang up or press
SP-PHONE.

Press FWD/DND.

Press FWD-Busy (F4).

Confirmation tone
and dial tone

<PT Display Example>

extension number where
the call is to be forwarded

The FWD/DND indicator light flashes red slowly.

FWD(BSY) Extxxxx

Enter the destination
extension number.

<PT Display Example>

extension number where
the call is to be forwarded

The FWD/DND indicator light flashes red slowly.

FWD(BSY) Extxxxx

You may press the flexible button assigned as
the FWD/DND button instead.

Summary of Contents for KX-TD816C

































































































































































































































































































































































































Search results

Summary of Contents for KX-TD816C

Reviews:

Related manuals for KX-TD816C

Brands by name

Popular brands

Panasonic KX-TD816C, User Manual

Search results

Summary of Contents for KX-TD816C

Reviews:

Related manuals for KX-TD816C

Brands by name

Popular brands